Cwejman ADSR-VC2 Dual-Envelope

Both envelope generators are identical and provide control voltages that can be used for dynamic change of all voltage controlled parameters, such as; frequency, amplitude, pulse width, cutoff.
The most common use is controlling a filters cutoff frequency and a voltage controlled amplifiers amplitude in order to achieve dynamic timbre- and level-changes. All parameters such as attack time, decay time, sustain level, release time and output level are voltage controlled.

GATE dip-switch; switches the Gates to an internal gate bus (Doepfer style frames).
5/8 dip-switch; sets ADSR1&2 output levels to 5 or 8 Volts. The 5 Volts output level is preferable for controlling of other Cwejman modules.

• Attack time: 0.1ms–10s
• Decay time: 0.5ms-20s
• Sustain level: 0-8V
• Release time: 0.5ms-20s
• Characteristic of the attack changeable between logarithmic and exponential
• Normal (0 - 8V) and inverted output (-8 - 0V)
• ADSR parameters and envelope output level voltage controllable
• Gate/Trig reacts on a threshold of 2V or higher
• Gate 2 In is pre-patched to Gate 1 In
• Trig 2 in is pre-patched to Trig 1 in.
• Power consumption: 30mA
• HP : 20