Klotz LX2-5X1K2-00.3 DMX Cable 0,3 m

The Klotz LX2-5X1K2-00. 3 DMX cable with a length of 0.3 m meets the requirements for use in theatres and on stages. It reliably transmits lighting control signals, as the OT2000 meterware used and the high-quality Klotz connectors impress with their excellent quality.

Klotz OT2000 is characterized by a combination of interference resistance and flexibility with simultaneous robustness.

The stranded wire pairs in particular effectively prevent interference from external electromagnetic influences. In this case, the cores do not run parallel, but are twisted together. Due to the twisting of the cores, the signal does not lose any stability even over longer distances. On the other hand, the cable also has the characteristic impedance of 110 ohms required for DMX cables. The defense is additionally increased by the spiral shield.

This, cotton threads in the pair gussets as well as the PVC outer sheath provide an important high flexibility and good drumability. At the same time, the PVC sheathing ensures robustness.

The housing of the 5-pin Klotz XLR plugs is nickel-plated. In addition, they have a coding ring for colour coding. Their silver-plated contacts furthermore ensure good conductivity.

• Diameter: 6.5 mm
• Minimum bending radius: 35 mm
• Operating temperature: -20 °C/+70 °C
• Characteristic impedance: 110 Ω
  
  

• Производитель:Klotz
• Цвет:Черный
• Длина кабеля (м):0,3
• Сторона гнезда A:5-контактный XLR "мама"
• Сторона гнезда B:5-контактный XLR "папа"
• Cable Cross-Section:0,22
• Контакты:Silver-Plated
• Тип кабеля:Цифровой кабель
• Sheath:PVC
• Экранировка:Спиральное экранирование