Klotz LX2-5X1K2-03.0 DMX Cable 3 m

The Klotz LX2-5X1K2-03.0 DMX cable with a length of 3 m meets the requirements for use in theatres and on stages. It reliably transmits lighting control signals because of the excellent quality of the OT2000 meterware used and the high-quality Klotz connectors.

Klotz OT2000 is characterised by a combination of interference immunity and flexibility with simultaneous robustness.

The twisted pairs of cores in particular effectively prevent interference from external electromagnetic influences. In this case, the cores do not run parallel, but are twisted together. Due to the twisting of the cores, the signal does not lose any stability even over longer distances. On the other hand, the cable also has the characteristic impedance of 110 ohms required for DMX cables. The defense is additionally increased by the spiral shield.

This, cotton threads in the pair windings as well as the PVC outer jacket provide an important high flexibility and good reeling properties. At the same time, the PVC sheathing ensures robustness.

The housing of the 5-pin Klotz plugs is nickel-plated. In addition, they have a coding ring for colour coding. Their silver-plated contacts furthermore ensure good conductivity.

• Diameter: 6.5 mm
• Minimum bending radius: 35 mm
• Operating temperature: -20 °C/+70 °C
• Characteristic impedance: 110 Ω
  

• Производитель:Klotz
• Цвет:Черный
• Длина кабеля (м):3
• Сторона гнезда A:5-контактный XLR "мама"
• Сторона гнезда B:5-контактный XLR "папа"
• Cable Cross-Section:0,22
• Контакты:Silver-Plated
• Тип кабеля:Цифровой кабель
• Sheath:PVC
• Экранировка:Спиральное экранирование