RME M-32 DA Pro

• High End DA-converter with 32 channels
• Format conversion between AVB, analogue In, MADI optical, MADI coaxial
• Routing via MIDI, USB or front panel
• level meter for each channel
• analog connections: 4x Line Out D-sub
• digital connections: AVB, MADI In/Out (optical and coaxial), MIDI In/Out, Word Clock In/Out
• redundant power supply (2x 60W), sockets compatible with locking power cables
• browser-based remote control in IP network even without AVB
• up to 100m cable length CAT5
• 1U 19" RACK
• USB port only for control and firmware updates
• incl. rack bracket, 4 rack screws, 2 power cables, 5 labeling strips

• Resolution: 24bit
  
• Output level switchable per channel +24dBu, +19dBu, +13dBu @ 0dBFS
  
• Outputs DC-coupled, fully balanced signal routing
  
• Output impedance: 200Ohm balanced, 100Ohm unbalanced
  
• Signal to Noise Ratio (SNR) @ +13/+19/+24: 116dB RMS unweighted, 119dBA
  
• Frequency response @ 44.1kHz, -0.1dB: 0Hz - 22kHz
  
• THD @ -1dBFS: < -109dB, < 0.00035%
  
• THD+N @ -1dBFS: < -107dB, < 0.00043%
  
• Crosstalk attenuation: > 110dB
  

The RME M-32 DA Pro is a 32-channel digital-to-analog converter with a multitude of control and routing options. Due to the flexible, multi-redundant signal distribution and the dual power supply it is perfectly suited for critical applications such as live operation at events, large recording sessions oder broadcasting. Of course it also serves its purpose as a professional workstation in any mid-sized studio and offers the clean sound and easy handling you are used to from RME.

Besides its outstanding technical values, like a signal-to-noise ratio of min. 116dB, the M-32 AD Pro also convinces with its capabilities as a format converter: Incoming line, MADI and AVB signals can be freely distributed to the outgoing MADI and AVB streams. So there is no need to buy a very expensive, separate format converter oder AVB converter, if you start to change your previously MADI-based setup to AVB oder but want to continue using an older converter, eg. from RME oder SSL. Thanks to this connectivity the M-32 DA Pro can be connected to your computer either with a MADI interface oder or an AVB router with point-of-entry. If you use a Mac, it can even be connected directly to the network port.

Like most professional converters, the M-32 Pro supports different types of control: You can either set it up classically with knob and Display oder feed it with commands via the MIDI port (here a break-out cable is needed), MIDI via MADI, USB oder or even via the network port. Network control works even if the M-32 Pro is not connected to an AVB network.

• Производитель:RME
• Converter build:DA
• Number of channels:32
• Формат:19"
• Outputs analog:DB25
• Подключение наушников:Нет
• входной разъем ADAT:no
• выходной разъем ADAT:no
• входной разъем AES/EBU:no
• выходной разъем AES/EBU:no
• MADI:optical/coaxial
• MADI коваксиальный:1-64
• MADI оптический:1-64
• Мировые часы:Да
• Clock 10MHz:No
• Network connections:AVB
• USB Update Slot:No
• Other interfaces:USB, MIDI
• THD+N in %:43
• Redundant power supply unit:No
• User:High-End
• Maximum sampling rate in kHz:192
• Maximum sampling rate in bit:24