Royer dBooster 2

• Amplifier for passive ribbon and moving coil microphones
  
• compact and robust (metal housing)
  
• 2 channels
  
• can also be used as a high-impedance Stereo DI box
  
• amplification with either 12 or 20 dB
  
• low-noise and low-distortion thanks to Class A circuitry
  
• impedance: 3.6 kOhm (very suitable for ribbon mics)
  
• high sound quality even with long cable runs
  

Royer presents the dBooster 2 , an extremely compact and phantom-powered amp for passive ribbon and moving coil microphones, i.e. it provides all non-phantom-powered microphones with additional gain before the actual preamp. Disguised in a metal costume , it provides additional gain of either 12 or 20 decibels - with low noise and distortion thanks to Class A circuitry , of course. On the input side, the impedance is 3.6 kOhm, which is higher than usual for many preamps and thus more suitable for ribbons.

Compared to the single-channel version , the dBooster 2 also offers the function of an electronic DI box . By dispensing with a transformer and a high input impedance, the maximum possible signal integrity is ensured here. At the same time, the active amplifier circuit allows for a rich level increase , so that the signal is optimally prepared for the preamp in the audio interface or recording rack.

• Производитель:Royer
• Amplifier principle:Transistor
• Number of channels:2
• Формат:Desktop
• Max. Gain in db:20
• Фантомное питание:Нет
• Hi-Z входы:2
• Highpass filter:No
• Входное сопротивление (Ом):3600
• THD+N in %:0
• Dynamic range in db:127
• Transformer balanced:No
• Адаптер питания:48V Phantom
• Digital converter:No