Equally at home in sound reinforcement and recording applications, the DPA d:facto is a high quality stage vocal microphone with extraordinary natural sound, high separation from nearby sound sources and extreme sound level handling. Its supercardioid pattern and superb definition gives high separation and true sound color on stage, equally suitable for PA amplification and recording. A robust three-stage pop protection grid built into the microphone removes unwanted noise. The d:facto II provides improved audio performance as it is superbly linear in frequency and phase, both on- and off-axis, while its impressive definition and accuracy reproduces a singer’s voice effortlessly.
Features: Adapters for wireless systems available Extraordinarily natural sound High separation Extreme SPL handling: 160 dB Superb definition
Specifications: Directional pattern: Supercardioid Principle of operation: Pressure gradient Cartridge type: Pre-polarized condenser Frequency range: 20 Hz - 20 kHz Frequency range, ± 2 dB, at 12 cm (4.7 in): 100 Hz - 16 kHz with 3 dB soft boost at 12 kHz. Permanent 3rd order low-cut filter (-3 dB at 80 Hz). Sensitivity, nominal, ± 2 dB at 1 kHz: 5 mV/Pa- -46 dB re. 1 V/Pa Equivalent noise level, A-weighted: Typ. 19 dB(A) re. 20 µPa (max. 21 dB(A)) S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 75 dB(A) Dynamic range: Typ. 120 dB Max. SPL, peak before clipping: 160 dB Power supply (for full specifications): 48 V Phantom power (± 4 V) Color: Matte black Microphone weight: 309 g (10.9 oz) Microphone diameter: 52 mm (2.05 in) Capsule diameter: 19 mm (0.75 in) Microphone length: 205 mm (8.1 in)