JBL JRX 225, passive loudspeaker 2x15"/1", 500Watt, 4Ohm

JBL JRX 225 overview: The JRX 225 is a portable, dual fifteen-inch, two-way speaker system designed specifically for applications in live music performance and music playback.

JBL JRX 225 features: Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling. JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability. The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region. A "Quasi 3-Way" design offers the extra bass for which a dual fifteen system is designed, but without sacrificing performance in the critical mid-range. The upper woofer produces mid-frequencies and bass, while the lower woofer concentrates on bass only. The reduction in mid-range phase cancellation greatly improves midrange sound quality and coverage. High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating. Progressive Transition™ high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response. The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance. SonicGuard™ protects the highfrequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles are used. Attractive 18-gauge perforated, steel grille protects components from damage.

JBL JRX 225 specifications: Power Rating: 500 W / 2000 W Frequency Range (-10 dB): 36 Hz - 16 kHz Frequency Response (±3 dB): 45 Hz - 12 kHz Sensitivity (@1m): 100 dB SPL (1w/1m) Nominal Impedance: 4 ohms Recommended Amplifier Power: 500 W to 1000 W into 4 ohms Maximum SPL: 133 dB Nominal Dispersion: 90? x 50? Crossover Frequency: 2 kHz High Frequency Driver: JBL 2414H-C 25mm (1 in) polymer diaphragm compression driver mounted on Progressive Transition™ Waveguide Low Frequency Driver: JBL M128 x 2 Input Connectors: Neutrik® Speakon® NL-4 (x1)- .25 in TS phone jack (x1)- parallel Dimensions (H x W x D): 1099 mm x 464 mm x 432 mm (43.25 in x 18.25 in x 17 in) Weight: 42.6 kg (94 lb)