Sennheiser e 912 S Boundry Microphone

The e 912 S is a high-quality, pre-polarised condenser microphone with half-cardioid pick-up pattern, acoustically optimized for picking up speech. Due to its unobtrusive, flat design, it is ideally suited for use on conference tables, altars and lecterns. The e 912 S can be switched on and off via an integrated membrane switch.

The e 912 S has been optimized for picking up speech at relatively short distances, while the sister model e 916 has been designed for instrument pick up. For this reason, the frequency response curve of the e 912 S differs from that of the e 912.

Sennheiser E 912 S features: Pre polarised condenser microphone Colour: black Pick-up pattern: half-cardioid Frequency response: 20 Hz - 20 kHz Sensitivity in free field, no load (1kHz): 6 (10) mV/Pa Depending on adjusted frequency response curve Impedance: < 100 Ohm Min. terminating impedance: 1 kOhm Maximum sound pressure level (passiv): 134 dB SPL Equivalent noise level: 26 dB (A) Equivalent noise level weighted as per CCIR 468-3: 37 dB Programmable membrane switch Very unobtrusive due to flat design Extremely rugged sound inlet basket Rubber damping plate on base Mounting slots for mounting the microphone to table tops, lecterns, etc. Gold-plated XLR connector Integrated electronics (instead of in-line preamp) An internal DIP switch bank provides the following features: on/off (factory preset), push-to-talk button (PTT), cough button (PTM) or permanently switched on (ON) Frequency response curve can be changed via a second DIP switch bank: low cut, low and high boost (factory preset), low boost or linear (see e 912) With the e 912 S, you can obtain the frequency response curve of the e 912 by setting the DIP switch to the position lin (linear) Incl. pouch Dimensions: 126.5 x 105 x 26.5 mm Weight: 550 g