Shure PSM 900 K1E, In Ear Set 596-632MHz

Shure PSM 900 features: CueMode - Instantly listen to any stage mix This feature allows for auditioning of up to 20 different mixes on a single bodypack at the touch of a button. Simply hear what the performer hears, without the need for any additional equipment. Scan the RF environment and assign an identified group and channel to a system over wireless IR link within seconds. Ideal for festivals and multi-venue events, the front-panel RF mute switch on the P9T transmitter enables or disables RF transmission, allowing setup operation without disrupting the RF environment.

Shure PSM 900 specifications: Environment: Medium to large stages RF Output Power: Switchable: 10, 50, 100 mW (+20 dBm) (regionally dependent) Operating Distance: Up to 90m Frequency Response: 35 Hz - 15 kHz Harmonic distortion: <0,8% Signal-to-noise-ratio: 90 dB (A) typical Compatible Systems per band (up to): 20 Transmitter Inputs: 2x XLR/6,3 mm combo, mic/line level Transmitter Outputs: 2x 6,3 mm outputs Wired Bodypack Option: No Personal Mix Control: On transmitter Remoteable Transmitter: Yes Battery Life: 2 AA, 5-7 h PSM 900 System RF Carrier Range: 470 – 952 MHz (regionally dependent) Tuning Bandwidth: 36 MHz – 40 MHz (regionally dependent) Companding: Patented Shure Audio Reference Companding Spurious Rejection (ref. 12 dB SINAD):>80 dB (typical) Frequency Stability: ±2.5 ppm MPX Pilot Tone: 19 kHz (±0.3 kHz) Modulation: FM, MPX Stereo (±34 kHz deviation, nominal) Operating Temperature: -18°C – +57°C

P9RA Bodypack Receiver: Front-End RF Filtering: –3 dB point 30.5 MHz from center frequency Active RF Gain Control: 31 dB (adjusts RF sensitivity to provide more RF dynamic range) RF Sensitivity (20 dB SINAD): 2.2 ?V Squelch Threshold (±3 dB SINAD): 22 dB SINAD Adjacent Channel Rejection: >70 dB Intermodulation Attenuation: >50 dB Blocking: >80 dB Image Rejection: >90 dB Audio Output Power (1kHz @ <1% distortion, peak power, @32?): 100 mW Minimum Load Impedance: 9.5 ohm High Boost Selectable: +3 dB, +6 dB @ 10 kHz Dimensions: 99 mm x 66 mm x 23 mm

P9T Transmitter: RF Output Impedance: 50 ohm (typical) Net Weight: 850 g Dimensions: 197 mm x 166 mm x 42 mm Power Requirement (RF on, 100 mW power mode, no audio): 415 mA, typical